You can save old batteries. Instead of sending them to the junk pile, you can buy the right charger and revitalize those old batteries and keep them around a lot longer. In the end, you save some money and keep your current unit reliable and powerful.
The reason your battery charger may automatically go into battery recondition mode is that it may be faulty. Or you bought a bad charger and you need to replace it. usually, the charger will go into this mode automatically when it detects your battery needs a little renovation work. It is a normal mode when everything is working right.
To learn more about this situation, just continue to read our article. It has the information you need to know about so you do not have to worry when it takes place. Also, it will tell you that something is wrong with the charger when it does this step all the time.
The term battery recond is very bad shorthand and should not be used as many people may not recognize it. The term should read battery recondition mode and when you have the complete term you can understand what takes place when this mode is used when you hook up your charger.
Modern technology has created new models of battery chargers that are called smart or intelligent chargers. The operation of these devices includes enabling the charger to work on old batteries and bring them back to life again.
They are reconditioned so that they can hold a charge and you do not have to spend a lot of money buying a new one. Not all modern battery chargers have this feature so you should look at the packaging to make sure it has this feature.
Recharging the battery takes special activity which normal chargers cannot do nor have the ability to do. So do not waste your time trying. This feature helps the environment by keeping lead-acid batteries out of city garbage dumps or other places where they are sent.
By reconditioning your battery, you are doing a small thing to help the environment.
The reason that batteries go dead and cannot hold a charge is that inside the unit the plates get a build-up of sulfate crystal. This usually happens when you do not use the battery for a long time and the crystals have solidified. When that happens the battery can no longer hold a charge.
The reconditioning charger works hard to remove those sulfate crystal build-ups allowing your battery to hold a charge once again. This is done by sending alow frequency signal towards the sulfate crystals which then break them apart and help them dissolve completely.
This is called cleaning your battery from the inside. The only way to accomplish this task is to have a charger that has a battery recondition feature built into it. With the lead plate's surface cleaned up, there is more surface available that facilitates the chemical reaction that provides power to your car or truck.
This may be a good alternative as the cost of these chargers are usually not as expensive as a new battery will cost you. At least a decent and reliable battery. Plus, you do not have to worry about bringing the old battery into the parts store to cut down the cost of a new battery.
This mode is advertised as a means to add life to your older batteries by using built-in pulse technology. It is simple to use and the charger works on AGM/GEL/WET type batteries although it may not recondition all batteries. You would have to ask to see if there are any limitations to this mode.
The charger automatically senses if the battery needs maintenance or just bulk charging. It handles the diagnosis so you do not have to worry about that part of maintaining your battery.
When operating this mode make sure to take the proper safety precautions just in case. You do not want to harm yourself or any vital body parts if anything unforeseen takes place. Also, place the battery in a well-ventilated room so that fumes do not build up.
The charger will automatically go into this mode when it detects that the battery has something wrong with it and it needs to clean up the problem. All you have to do is connect the charger to the battery in question and you are good to go.
However, if the charger is malfunctioning, and this can happen, the unit may go into this mode when there is nothing wrong with your battery. You may have to take it to a technician or return it to the store to get a new model if this starts to happen when you connect it up.
When the charge malfunctions in this way, it will be basically impossible to use any other features built into this device. You should have an experienced technician look at it to see what can be done to get it back to normal operating procedures.
This will depend on how rough of a condition your old battery is in. Some estimates that have been made say about 16 hours. But that is including the charging time which can be longer or shorter depending if there is any charge left in the battery or not.
Look at the owner’s manual to see if it gives you an exact time frame but that may be impossible to do as there are so many different factors involved. If the charger is malfunctioning, it may not recondition or charge the battery at all.
If you do have a problem with the charger, there is supposed to be a 3-year warranty protecting it from any damage under normal use. Just take it back to the shop or store you bought it from and see what can be done to fix the charger. Ultimately, you can replace it if the damage cannot be fixed.
According to our research, it seems that this charger can do miracles for your older batteries. It will just take some time to get the reconditioning done so you will need some patience as you wait for the charger to work.
We have not come across any real complaints about the feature not working so chances are it is a solid option that helps you save money. The cost of the charger has been listed at $55 approx at Walmart which means it may be the same price as a new battery.
The choice will be yours to make as you can use this charge rover and over helping to save you from spending the time and extra dollars to get a new battery. Check out all the reviews before you purchase and go see the charger in action if you can.
There are 3 good reasons why you should invest in an Everstart Maxx battery reconditioning charger.
1. They are easy to use- these chargers come with a full set of instructions telling you what you need to do to recondition your old batteries. All you have to do in some cases is hook up the charger, attach it to the battery and let it do the diagnosing and work.
It is that simple but just keep an eye out for any malfunctions as those will stop the process quickly.
2. You save on storage space and hassle- dead batteries can be a hassle to have around your home. They are merely taking up space and doing nothing but being a paperweight.
The reconditioning battery charger can bring new life to those batteries making it possible for you to use them again and avoid paying for a new one. Plus, you can clean out the garage of those batteries and put them to good use.
3. Help the environment- one way to do that is to keep these old batteries from finding their way to disposal sites. Reconditioning old batteries is one good way of stopping that cycle. The fewer old batteries make it to the disposal site the better it is for the environment.
Recharging and reconditioning old batteries means that you can delay buying a new one. That means the money saved can be put to better use elsewhere. The key is to make sure the charger you buy is in top working condition.
The Everstart Maxx model is a good charger and it seems to come with a fairly good reputation. Check it out to see what it can do for you. With a 3-year possible warranty period, you really have nothing to lose.